Step by Step to Clean your Laptop and Notebook

The LED screen on your laptop should be cleaned regularly. Dust and all that is in the air could be pulled into the outside of the screen. Make sure that the power of the power is off. Use normal clean water dampened lint-free cloth to wipe off all light debris from the surface. Do not use chemicals like cleaning. If necessary, you can get a cleaning kit for the LED screen that has a very mild cleaner and a cloth. It works on the flat screen TV as well.

Cleaning the laptop keys

While power is still out of the laptop, use a lint-free clean cloth with a cleaning agent mild glass. Do not use bleach or other strong cleaning agent. Spray the cleaner on the cloth, not the keys. Gently wipe each key of the Notebook. Leave the keys to dry for about 20 minutes before turning the laptop on.

When you are able to see dust and hair inside the mouth or on the sides and bottom of the case laptop, you can bet that you can find more in the laptop. The best way to get it all out to open the file. Do not try to blow it off from the outside. This does not clutter the inside of the notebook. All laptop cases can be opened easily. There are several small screws that hold all such cases. There will probably be small plastic or rubber caps covering the screws holding the display.

• Virtually all laptops covers are removed from the bottom.
• Be sure the power cord and battery are loose before you begin.
• Remove the hard drive and place it in a safe place off the track.
• Avoid using cordless or a magnetic screwdriver.
• If your laptop bag is completely open, you will see the dust bunnies sitting by the cooling fan for laptop and the CPU heat sinker.
• Remove large pieces with a pair of tweezers.
• The compressed air in a box works great for blowing dust on and around the motherboard and the keys.
• Be sure to keep the case when using a laptop vertical canned air.
• If the air is tilted down when used retains the gas in a liquid can become.
• It will probably be wrong parts inside the laptop.

When reassembling the laptop, be sure to use the correct screws in the correct places. Some tend to live a little longer than others, and must be placed where they were before. Pay special attention to any ribbon cables and connectors. The keyboard and mouse pad uses these. Make sure that the compression or corner connectors are tight before proceeding to the next step. You will not want to need to reopen the case until it is time to clean again. When finished, your laptop will probably be almost brand new.